HEAT SHRINK SPLICE KITS for submersible pump wire

HEAT SHRINK SPLICE KITS
for submersible pump wire

Dean Bennett Supply can supply your pump, pipe, wire, and connectors to allow you to install your submersible water well pump system yourself. Call us at 800-621-4291 for information and assistance.

The heat shrink splice kit is shrunk around the stakons on your wire to protect against water in a well. You will need a 4 wire heat shrink splice kit to connect the submersible pump motor lead to the submersible pump wire. The kit consist of 4 stakon connectors and Stakons are used to crimp the wire ends together before shrinking heat shrink material over them to seal out water. 4 heat shrink tubes to protect against the water. You will slide a tube over each wire. Strip off the wire insulation to expose the wire end and crimp a stakon onto the end of the motor lead wires. Next you will connect the stakon to the matching color coded wires from the submersible pump wire coming down from the surface of the well, and crimp them to the motor leads. Slide the heat shrink tubing over the splice and heat it with a lighter to melt the tubing down over the stakon. The tubing will shrink down to where you can see the stakon through the tube and the sealant will ooze out the ends of the tube, all around the ends. When the sealant has oozed out sufficiently, the connection will be water tight. The heat shrink splice kit cost you $ 5.75.

Dean Bennett Supply Company at 800-621-4291 can help you with all your pump and well supplies. Call us for assistance in selection of the items you need for your water well submersible pump system.

PUMP SYSTEM HOME

Download our catalog in pdf format