YOU CAN
INSTALL YOUR OWN
WATER WELL PUMP SYSTEM

DEAN BENNETT SUPPLY COMPANY at 800-621-4291 can help you to understand what is required to put in your own water well system. Dean Bennett Supply has been serving the water well industry since 1965. We stock everything you need to put in a submersible pump system for your livestock or home water supply needs.

Dean Bennett Supply Company Pays the FREIGHT on $ 1000.00 orders. Call us a t 800-621-4291 for details.

Dean Bennett Supply sells pumps ranging from 1/2 hp 5 gallons per minute, up to 5 hp 55 gallons per minute. Call us at 800-621-4291 for assistance in selecting the proper submersible pump for your water well system.

Call 800-621-4291 for Pump Systems
Dean Bennett Supply Co.

Constant pressure pump systems give you city water pressure from a rural well.

Heat tapes protect your water pipes from freezing during cold months.

Industrial Grade Heat Tape for water pipe protection against freezing.
NEW LOWER PRICES ON INDUSTRIAL HEAT TAPE

Drawing of a submersible pump system showing the pump in the well through the tank in the house. Submersible Pump
Torque Arrestor
Splice Kit
Bell Splice Box
Cable Guards
Safety Rope
Submersible Pump Wire
UF Burial Wire
Pressure Tank
Tank Fitting Kit
Pump Control Box
Pitless Well Cap & Well Seals
Underground Discharge
Pump Setting Tools
Pump System Pipe
Sample Pump Systems
Tank Nipples
Water Pipe Heat Tape

FLINT & WALLING 
Self Priming Centrifugal Sprinkler Pumps for lawn irrigation systems, 

Do It Yourself System Help

 SPJ lawn sprinkler pumps for lawn irrigation.

LAKOS   Sand Separators

 

fw-line.gif (71946 bytes)

4" Submersible Pump Installation Instructions

  Pump Sizing Questions

Needed Well Information List is at page bottom


Heated Water Hose
for RVs and Motorhomes

 F&W Pumps
Select the 4 inch submersible pump that is right for your water well conditions.
4 inch deep well submersible pumps are designed to pump from deeper water wells where other pumps would not perform.
Constant pressure submersible water well pumps give you water pressure like the city water system does.

6 inch submersible pumps are used in irrigation water wells where large volumes of water need to be pumped in a short period of time.

VFD Variable Frequency Drives
SPJ lawn sprinkler pumps are ideal for lawn irrigation from a pond or shallow well.
Centrifugal pressure booster pumps are used to produce higher pressure at head feet above normal centrifugal pump capacity.
Artesian Variable Frequency Drives
High pressure booster pumps boost incoming pressure to a desired level of pressure.
Uniform pressure centrifugal pumps give a constant water flow at a specific pressure to give constant pressure at the tap.
Jet pumps are used on the surface to draw water from a well. Shallow well jet pumps pump from 20 feet or less, and 2 pipe deep well jet pumps pump from deeper depths.
Low Flow Water Supply
Deep well vertical jet pumps are 2 stage jet pumps to pump from deeper depths and give more gallons per minute.
Submersible pump wire connects with power at the top of the well and connects underwater to the motor lead.
UF direct burial wire cable is used to run power from the power source underground to a well.
Aie E Tainer pressure tanks buffer your water pressure to give you a more even pressure when you open the tap. The pressure tank also acts as storage to have a certain amount available before your pump needs to turn on.
Water well accessories are items needed to complete a water well system.
BW LH systems protect your pump from running out of water in a low producing water well.
BW RH systems control power to a well pump to keep a cistern full of water.
Setting a submersible pump into a well requires the use of special tools to control lowering the pipe.
Gas driven pumps make it possible to transfer water from a stream or holding tank to another point at a fast rate of speed.
Galvanized steel pipe tank nipples are threaded all the way to allow conncetion of a pipe through a tank wall.
Wintergard heat tapes are used to keep water lines from freezing during the cold of winter.
Heated Water Hose

Zoeller M267 Sewage Pump and M53 Sump Pump are Zoeller Pump Company's best buy models.

Zoeller Pumps
zoeller-sewagepumps-group.gif (68095 bytes)

ZOELLER'S PROGRESSIVE CAVITY
SEWAGE GRINDER PUMPS
Equal to ENVIRONMENTAL ONE
Zoeller sump dewatering pumps keep your basement dry when ground water and run off accumilate
Zoeller sewage pumps are the quality reliable means to eliminate sewage from your sewage collection system.
Zoeller 820 SHARK Sewage Grinder Pumps chew up sewage to pump it away to the sewer main.
Zoeller 840 commercial sewage grinder pump systems are for more demanding sewage grinding applications.
Zoeller offers the best replacement for a failed Hydromatic sewage grinder pump, the Zoeller 840 sewage grinder pump.
Zoeller QwikJon allows you to add a toilet bathroom system to your basement without costly cement reconstruction.
Zoeller battery powered backup sump pumps are ideal when power outages prevent your regular sump pump from working.
Homeguard water powered sump pump will keep your basement dry when the power is off.
Zoeller package sewage pump systems consist of the sewage pump, the sewage collection basin, and the check valve.
Residential outdoor burial sewage basin with sewage pump for outside sewage system.
Zoeller sewage basins are used to collect sewage from your bathroom toilet and then pump the sewage away to the sewer.
Rail systems assist you in installing and removing a sewage pump from a deep basin baried in the ground.
Crawl space dewatering package systems are used to collect water from crawl spaces and pump it away.
Zoeller float switches turn on and turn off a pump as water level changes.
Zoeller check valves prevent sewage from running back from the discharge line into the collection pit.
Zoeller control panels control turning on and of a pair of pumps while alternating between them on each start up.
Prevent pumping oil hydrocarbons from your sump pump system.
Aermotor windmills are made in the USA. Aermotor Windmills Windmills pump water using the wind power where electric power is not available.
Aermotor windmills are the standard to compare to. When you need to pump water for livestock, or just want the original Aermotor windmill to view, there is no other that carries the same feeling, look, or quality.
Fiasa windmills are imported from Argentina, and are a true 702 Aermotor windmill.
Windmill towers are made from steel to support the water pumping Aermotor windmill in strong winds.
We stock a full line of repair parts for your Aermotor windmill. Call us for the parts you need.
Baker hand pumps are just like the hand pumps you use at state parks. Pump water without power and be more independent.
Baker pump jacks pump water with a cylinder and rod, powered by an electric motor or a gas engine.
Windmills pump water with a stroke cylinder that lifts water from the well to the surface.
Deep well pumping cylinders are used with larger windmills, or where a water well is real deep.
Windmill cylinders need rod to connect the pumping cylinder to the windmill stroke mechanism.
Cylinder cup leathers for pumping water with windmill or hand pump well cylinder pumps.
Windmill stuffing boxes are packing glands that prevent water from leaking out around the rod the traverses through the stuffing box to pump water.
Bob Float valves control water level in stock tanks, by opening a valve as the water level drops and clocing it when the desired level is achieved.
Reliable stock tank floats are flat floats that are used to activate a float valve to control water level in stock water tanks.
Stock tank heater deicers are used to keep livestock water tanks open during winter months.
Wintergard heat tape is ideal for protecting water lines from freezing in the cold of winter.
Windmill systems require several accessories to complete the windmill water pumping system.
Galvanized steel tank nipples are used to put a threaded nipple through the side of a water tank.
Through the wall seals can be accomplished with a pipe seal that expands into the opening as pipe is pushed through, creating a seal that does not leak.
When the wind doesn't blow hard enough for the windmill to pump, out pump and cylinder combination makes it possible to pump water with an electric submersible pump to keep water tanks full.
Windmills are desireable lawn decoration which can give a nostalgic feel to your lawn.
We have a manual for the 702 Aermotor windmill as well as a book written by an old time installer that will give lots of information about how your windmill works and how to maintain it.

 

DEAN BENNETT SUPPLY COMPANY at 800-621-4291 can help you to understand what is required to put in your own water well system. Dean Bennett Supply has been serving the water well industry since 1965. We stock everything you need to put in a submersible pump system for your livestock or home water supply needs.

Dean Bennett Supply Company Pays the FREIGHT on $ 1000.00 orders. Call us a t 800-621-4291 for details.

Dean Bennett Supply sells pumps ranging from 1/2 hp 5 gallons per minute, up to 5 hp 55 gallons per minute. Call us at 800-621-4291 for assistance in selecting the proper submersible pump for your water well system.

PREFER TO PERSONALLY VISIT WITH OUR SALES PEOPLE?   Call us at no cost on our nationwide toll free phone   ( 1 - 800 - 621 - 4291 )   Monday thru Friday    7 AM to 3 PM   Mountain Time Zone. Our sales people will be glad to answer your questions, take your order, or help you in any other way we can on products we sell.

Our Denver warehouse and office complex is not a retail type store front. All sales and help is by phone only. All orders must be placed and paid for prior to your arrival at our will call counter, should you need to pick your order up in Denver.

Catalog Request

Download our catalog in pdf format

 

After your well has been drilled, you will need the following information to begin the selection of your water well submersible pump system.

How deep is your well?......................................

How many gallons of water does your well produce per minute? .......................       

Where is the static water level,.........................
where the water comes up to ( down to water from the surface )?

After you get to the top of the well, do you need to pump the water uphill? ....................

If you do, how far straight up hill rise must you pump the water? .......................

Is there a longer run from the well to where the water is being pumped to? ........................
How far is this run from the well top to the destination?...............................

What size pipe are you pumping through? ........................

Is the pipe PVC, Black Poly Coiled Pipe, Copper, or Steel? ........................

When you get to the destination, what is your required gallons per minute and pressure?
GPM ...................................        PSI .................................

Are you pumping into a pressure tank from the well, or into a cistern to collect the water?
If you are using a cistern, you will need a pump to pressurize the house system.
We recommend the Flint & Walling CPH-05-S Shallow Well Jet Pump.

How far from the well is the power supply for your water well pump system? ......................

Call Dean Bennett Supply at 800-621-4291 to request your water well pump system catalog, and for assistance in designing your submersible water well pump system.

Over 37 Years of Pump System Experience

MY SELECTED COMPONENTS
for my submersible pump system

Submersible Pump Model..................................................................................................

Pump Wire size and length................................................................................................

Distance from well to power.......................... Size UF wire needed............................

Well Cap size......................................

Pitless Adapter needed......................................

Size well pipe needed.......................... How many feet are needed...........................

Check Valves needed...................... Torque Arrestor ................

Cable Guards...........................  Discharge Pipe .................................

Length of pipe needed...................................

Pressure Tank................................... Tank Fitting Kit size....................................

Splice Kit for wire............................. Bell Splice Box ................................

Wire Nuts ....................  Safety Rope......................................

Pipe Setting Tools....................................................................

Flint & Walling Pumps

Zoeller Sump & Sewage Pumps

Aermotor Windmills

Download our catalog in pdf format