| STUFFING BOXES for Windmills |
DEAN BENNETT SUPPLY |
WINDMILL STUFFING BOXES
|
$ 112.00 | 1-1/4" Stuffing Box designed to screw into a 1-1/4" tee, these heavy duty stuffing boxes are made entirely of brass and are furnished with steel rods 3/4" diameter by 18" long with either 7/16" or 5/8" threads (specify) These boxes are already factory packed using 1/4" square graphite rope packing and are ready for installation. |
| $ 129.00 | 2" Stuffing Box with an 18" rod designed to screw into a 2" tee. | |
| $ 165.00 | 2" Stuffing Box with an 48" rod designed for use with open top working barrel cylinders. Eliminates the need for a make-up pony rod to go down into the cylinder to the plunger. | |
| $ 4.95 | 1/4" x 6" long pieces of graphite rope packing | |
| $ 21.75 | Replacement 3/4" x 18" Steel Rod Only (specify 7/16" or 5/8" thread size) | |
| $ 37.50 | Extra Long 3/4" x 48" Steel Rod Only threaded 5/8" both ends |
HEAVY SERVICE PACKING BOXES
| $ 312.00 | 2" Heavy Service Packing Box is extra heavy, made entirely of brass and furnished with a steel rod. They are bored throughout the full length to hold the most packing possible. Piston rod is 1-1/6" diameter x 4 feet long and threaded 5/8" for pump rod. Uses about 5 ounces or 3/8" packing. |  |
| $ 343.00 | 2-1/2" Heavy Service Packing Box like above unit except rod has 7/8" threads and uses 1/2" packing. | |
| $ 350.00 | 3" Heavy Service Packing Box like 2-1/2" unit above except this unit is special order only |
#3 Inverted Brass Tube Stuffing Box
|
| $ 135.00 | #3 Inverted Brass Tube Stuffing Box has a 1-1/8" inside diameter brass tube that is 18" long. The top brass connection is threaded 2" male iron pipe thread. The brass piston has two 1-1/8" leather cups on a 5/8" steel plunger rod with standard 5/8" rod threads. This IBT stuffing box can accomodate up to a 12" stroke. Larger diameter brass tubes and longer strokes are available on request. |
GALVANIZED STEEL STUFFING BOX TEES
Download Stuffing Box Tees page 62 in pdf
At the top of your string of galvanized steel drop pipe going down to your cylinder in the well, you will need a galvanized steel tee to screw your stuffing box into, and the water pipe out the side of the tee to carry the water over to the destination, whether it is a stock tank of pond.
|
|
Size Tee | Price | |
| 1-1/4" | $ 4.50 | ||
| 2" | $ 9.30 | ||
| 2-1/2" | $ 25.00 | ||
| 3" | $ 29.50 |
Download our catalog in pdf format
Prices effective August 1, 2008
