WATER FILTERS
Download water filters on page 36 in pdf
SINGLE CARTRIDGE WATER FILTERS
|
Standard single cartridge water silters have a clear transparent sump, a black head with 3/4" female pipe threads for both inlet and discharge, and measure 5-1/8" wide x 12-1/2" high. These are adequate for a maximum of 10 gallons per minute service flow rate, and are rated for 125 psi pressure. | ||
|
Dirt and Rust Sediment Filters |
|||
|
|
|
Single filter Dirt and Rust sediment filters. This complete water filter comes with one WP5 replacement cartridge that will trap sediment down to 5 microns in size. |
|
|
$ 7.50 |
PFMC1 |
|
|
|
$ 4.95 |
PFSW2 |
|
|
|
|
|
The WP5 dirt and rust sediment filter element is wound polypropylene. These are the proper elements for use when replacing the old element of the filter above. Superior to the common pleated paper, these filter elements remove smaller particles. The polypropylene cord is wound around the core in a precise pattern that ensures a high efficiency rate, and a high dirt loading capacity. WP5 elements are 9-7/8" long, and will fit most single cartridge standard water filter housings. |
|
|
|
|
Case of 24 WP5 sediment dirt and rust filter elements. |
|
|
|
|||
|
|
|
Complete Taste and Odor removal filter comes with one GAC10 replaceable cartridge designed to reduce or eliminate most unwanted taste and odors such as chlorine. |
|
|
|
|
The GAC10 canister style cartridge is 9-7/8" high, and filled with lignite based granular carbon. The water enters the cartridge from the base of the canister and must travel through the entire charcoal bed before exiting at the top. This filtration technique maximizes contact time with the carbon to insure optimal contaminant absorption. |
|
![]() |
These double cartridge length filters have an opaque blue sump with a black head. The head of the filter housing has 3/4" female iron pipe threaded inlet and discharge. Unit measures about 5-1/8" wide x 22-3/8" long. These are adequate for a maximum 20 gallons per minute service flow rate. Housing has a 125 psi pressure rating. |
||
$ 55.00 |
PS20S1 |
|
|
$ 75.95 |
PS20GAC |
|
|
$ 27.50 |
GAC20 |
|
|
| HIGH
CAPACITY WATER FILTERS
These large diameter cartridge filters have an opaque blue sump with a black top. The inlet and outlet are 1-1/2" female pipe thread. Housing measures 7-1/4" x 13-5/8" long. The high capacity water filters are adequate for 40 gallons per minute maximum flow at pressure of up to 100 psi. |
|||
![]() |
$ 85.50 |
HD15R50 |
|
| $ 17.00 | R50BBS |
High Capacity Jumbo Sediment Filter Elements are pleated polyester fabric. The R50BBS filter element is 4-1/2" diameter x 10" long. |
|
| $ 7.50 | PFSW3 |
Spanner Wrench for Large Diameter Filter Housings. |
DEAN BENNETT SUPPLY COMPANY
800-621-4291
Prices effective October 15, 2008