Alarm package is included but not pictured.
The floats for turning on and off of the pump
and for the alarm are connected through the
QuikBox watertight splice connection box.
An 1-1/4" PVC Ball Valve is installed at the 1-1/4" Bulk Head discharge fitting
to prevent sewage from draining back into the tank after disconnection.
|
24" x
60" FIBERGLASS SIMPLEX BASIN
Simplex Tank suitable for outdoor burial installation.
#31-0946
$ 549.00*
Download
Burial Basin in pdf
This 24" x 60" deep
fiberglass simplex basin is designed for outdoor installation for a
single sewage pump or for a grinder pump. The basin has an
anti-floatation ring to prevent the tank from rising due to ground
water. A solid 3/8" thick fiberglass lid covers the tank, while
you get 5 grommet seals, one 1-1/4", one 1-1/2" two
2", and one 4", to install incoming and outgoing pipes.
| 
|
|
36" x 60" FIBERGLASS DUPLEX
BASIN
NOW IN DENVER
STOCK
#31-1451
$ 1035.00*
This 36" x 60"
fiberglass outdoor burial basin is designed for a duplex 2 pump
installation. The basin comes complete with a set of 5 Adapta-Flex
seals for installing your lines in and out of the basin. The seals
are one 1-1/4", one 1-1/2", two 2", and one 4".
This basin can be used with 2
sewage grinder pumps, or 2 standard Zoeller sewage pumps, for a
duplex 2 pump sewage system.
| 
|
|
RAIL SYSTEMS FOR INSTALLATION IN THE ABOVE
OUTDOOR BURIAL BASINS
|
$ 245.00 |
#SPDS5 Build
your own burial sump or sewage package. This rail system has
connection for an 1-1/4" from the pump to the discharge.
Install the sewage pump disconnect rail system into any of the
outdoor burial basins above, to accommodate installation of
your sewage pump, making it like the packaged system we offer
above. The rails are 3/4" pipe size, for the ability to
fit any depth tank. |
 |
$ 319.00 |
#SPDS8 This
2" sewage pump disconnection rail system is just like the
unit above, except that it is for 2" discharge pumps to a
2" discharge line. The rail system still uses the
3/4" pipe size rails, and can be sized to fit any burial
outdoor sewage tank. |
| The
above sewage pump disconnect rail systems can also be used in
the indoor sewage basins that install into your basement
floor. This makes it easier to remove the pump from the basin,
and even easier to align the pump when re-installing it into
the basin. |
|
* due to high truck freight cost on sewage systems and basins
larger than 18x30
it is necessary to charge $ 125.00 surcharge on these systems and basins.
THIS FACTORY ASSEMBLED SYSTEM IS NOW A DENVER STOCK ITEM
READY FOR DELIVERY
|
